BDCARMA... The build.

[BJB]

As I mentioned, the build is underway at RDP Motor Sports. Some recent photo's.

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/photo2-1.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/photo1-1.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/34903_412770609570_133015439570_427.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/34903_412770604570_133015439570_427.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/34574_412770659570_133015439570_427.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/34574_412770654570_133015439570_427.jpg

[SRTILL8]

:drool:

[DJ BoNiOmArIo]

umm where's the rest of the Jeep? LOL

:D

[robpp]

so Brian......this is the chassis that saw the trans explode a few years ago?

also, without letting out any secret sauce, can you give us some details of what we see and what the goals are for this?

thx

[BJB]

umm where's the rest of the Jeep? LOL

:D

Dumpster :D

so Brian......this is the chassis that saw the trans explode a few years ago?

also, without letting out any secret sauce, can you give us some details of what we see and what the goals are for this?

thx

This is the Jeep. :o

Fortunately it was insured at the time of the incident. After several months of bickering it was covered and written off as a total loss. And I retained the vehicle and title :D

Here are some of the insurance photo's
http://s423.photobucket.com/albums/pp312/BJBSRT8Jeep/BdCarma%20Insurance%20pics/

The Jeep obviously will be a track only vehicle. Probably will have 2 front seats, full cage, certified to run 8.5 1/4 mile. With only a few minor modifications it will look like a Jeep SRT8 from the outside. The cutout for the center exhaust will be widened for the wheeler bars. Parachute will be located where the rear wiper is.

Motor combo has not been decided.

Updates to follow :D

[DJ BoNiOmArIo]

:eek:

[Chuck]

http://4gifs.com/gallery/d/27703-2/HappyBirthdayBlackKid.gif

:eek:

[Scottina06]

gonna be sicko

[Scottina06]

subscribed

[BJB]

Looks like she will be putting back some of that weight she lost!!

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Steel.jpg

[Robert Palmer]

She has an Iron enriched diet! LMAO

[Vinnysrt8]

im so happy u started working on badkarma

[hawkman996]

SAH-WEET!!! This will be a wicked ride when finished, I am sure of it. :thumbsup:

[BJB]

so Brian......this is the chassis that saw the trans explode a few years ago?


Here was one of the obituaries... :lol:

http://blogs.insideline.com/straightline/2009/01/when-900hp-attacks-modified-srt8-jeep-grand-cherokee-blows-its-transmission-to-pieces.html#more





.

[GR33N D3M0N]

heres another...cant believe u made jalopnik!

http://jalopnik.com/5141043/921-hp-jeep-grand-cherokee-srt8-completely-grenades-transmission

good luck with the build

[BJB]

It even made a Russian news article...

http://auto.newsru.com/article/02feb2009/korobka-vzorv



.

[GR33N D3M0N]

haha, u know ur awesome when u get an article in Jalopnik, and some random Russian website...cant wait to see the outcome of this!!

[DAVY27]

^x2. sick!

[soontobesrt]

wow, news spread far and wide! Im hype for this build, for anyone who's anyone in the Jeep world, Brian was definitely the first or one of to make these things go fast! Im sure this next build will be nothing short of amazing. Just hope you don't blow anything up this time! :( Solution? MAKE IT BULLET PROOF! :)

[BJB]

Time for the doors to go through their weight reduction!!
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_0097.jpg

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Door-1.jpg

Fire wall all cleaned up;
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_0100.jpg

[Darkside]

Saw your Jeep there last week. Their shop is only 15 minutes away from my house.

[Escape]

Awesome man and don't forget to put a blanket/scatter shield on that trans! Save the feet.

[05wkguy]

I vote a twin turbo big block goes in that puppy!! 572 cubes of snarling, nasty, blown power!!!

[BJB]

The RDP crew have been busy http://deephousepage.com/smilies/grinyes.gif

Suspension parts arrived

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/RearSuspension.jpg

Custom frame rails being fitted

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Frame.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Rearshot.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Rearclose.jpg



.

[Scottina06]

cool....thanks BJ

[1BAMFR]

This is going to be unreal!

[Frankie]

This is going to be unreal!

Yup Yup Yup

[BJB]

Much more progress in the last few day's...


http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Frame2-1.jpg

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Frame1-1.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/frame3.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Rearclose.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/frame4.jpg

[RiverCityWK]

:drool:

[soontobesrt]

Awesome! how good or reputable is RDP with chassis work, just curious? I'm sure good enough if yo are having them do it, just never heard of anyone on any Jeep or SRT8 board dealing with that kinda thing before. Any reason you did this instead of grabbing a full race ready chassis and having someone mount the Jeep SRT8 body on it?

You are not using a full interior in bdcrma right? Is this gonna be race seat, cage, harness etc?? Parachutes or only the wheelie bar out back? Just curious how drivable shes gonna be, street legal even? Thanks in advance haha - if its confidential feel free to ignore my post haha

[BJB]

Awesome! how good or reputable is RDP with chassis work, just curious? I'm sure good enough if yo are having them do it, just never heard of anyone on any Jeep or SRT8 board dealing with that kinda thing before. Any reason you did this instead of grabbing a full race ready chassis and having someone mount the Jeep SRT8 body on it?

You are not using a full interior in bdcrma right? Is this gonna be race seat, cage, harness etc?? Parachutes or only the wheelie bar out back? Just curious how drivable shes gonna be, street legal even? Thanks in advance haha - if its confidential feel free to ignore my post haha

RDP is solid in this type of work. This is the first project like this "State side" but Steve has done many back in the land of Oz.

This Jeep had a transmission explode in it a couple of years ago. The resulting fire caused it to be totaled. It was insured (Stated vale, not blue book:lol:) so we kinda made the plan to do this the night of the accident.

This will just be a track only vehicle, I have GDCARMA for my weekend drive.

[muellge]

is rdp doing this work or am I the victime of too much Rodney Strong...? forgive my appreciation of current events...

[blackpepper]

Do you have any idea how much it'll weigh? Insane....


(I feel like I'm asking questions on "passtime" LOL)_

[JAYBEE3]

This is insane bro this is wat you call custom ...So all the other parts?? are they for sale???

[BJB]

is rdp doing this work or am I the victime of too much Rodney Strong...? forgive my appreciation of current events...
Yes, the work is being done in Painseville. And who the heck is this Rodney cat?:confused: I even google'd :lol:

Do you have any idea how much it'll weigh? Insane....


(I feel like I'm asking questions on "passtime" LOL)_

Just a guess, 3,600 - 3,800. I know it weighed a lot less last week.

This is insane bro this is what you call custom ...So all the other parts?? are they for sale???

There are some. I sold the front seats, most anything dash related was melted in the fire, so yea there are a lot of parts that will not be used :thumbsup:

[BJB]

Short Video of the build.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/7e7X8jhg2yc&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/7e7X8jhg2yc&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

[BJB]

More work today... Rear diff being fabbed and in place.

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/reardiff.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/reardiff2.jpg

[DJ BoNiOmArIo]

Oh my ... this build is coming along real sweet !!!

[muellge]

Yes, the work is being done in Painseville. And who the heck is this Rodney cat?:confused: I even google'd :lol:

J

he gets no respect.....

[scoutermike]

Looks like it's going to be a wild machine Brian. Can't wait to see it.

Mike

[OBXJeep]

Awesome build going on man. Can't wait to see the track videos!

[BJB]

Looks like it's going to be a wild machine Brian. Can't wait to see it.

Mike

Hey Mike, is that you and I in your sig picture?? :cool:

[BJB]

I'm going down to RDP in the morning so should have a update later this week. :D

[psycojeep]

Very Sweet cant wait to see some more progress

[MatFab]

Coming along well. Whats it going to be certified for?

[White Chocolate]

sweeeet

[BJB]

Coming along well. Whats it going to be certified for?

8.5 seconds

[BJB]

Went down to RDP for the day on Tuesday, and they are really making some great progress. To be honest the pictures really don't do it justice..

The final weight of this will be around 3,100lbs. http://deephousepage.com/smilies/jerkit5.gif

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7506.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7538.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7537.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7536.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7535.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7534.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7533.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/IMG_7532.jpg

[DJ BoNiOmArIo]

amazing progress 3100 !!!! Holy moly that's two thirds of what a regular one weighs that shit is gonna straight out fly

[Scottina06]

holy guacamolie!(sp?)

[Shadohc]

subscribed

[yousmellfunnytoo]

I want :)

[JOESRT8]

That is going to be one insane jeep!

[maxst2]

Looking good.. nice progress too. Any updates on whats going to power it? or will it be ancient Chinese secret?

[jps043]

Damn, I have never seen a jeep more stripped in my life. Talk about weight reduction. I am now subscribed to this thread and excited to see the progression.

[BJB]

Looking good.. nice progress too. Any updates on whats going to power it? or will it be ancient Chinese secret?

Leaning towards a twin turbo 440 using the new aluminum block. :D

[soontobesrt]

Leaning towards a twin turbo 440 using the new aluminum block. :D

Thats awesome! Any reason you're going w/ the 440 and not the aluminum 426 in a boosted app? Any idea on what kinda compression you're gonna run either? Just curious, again if its confidential just ignore this lol, just curious is all :)

[tugboatchad]

Leaning towards a twin turbo 440 using the new aluminum block. :D

Do it BJ! Once you or others have proven this setup the lemmings will follow! ME namely! An Aluminum FI setup is my dream motor, but not until Im driving a 2013 SRT8 Jeep as my DD and my '10 beast is an exotic beast of epic proportions. Thank goodness for you testes!

[tugboatchad]

Damn Jack and Coke, that should read testers!

[BJB]

Thats awesome! Any reason you're going w/ the 440 and not the aluminum 426 in a boosted app? Any idea on what kinda compression you're gonna run either? Just curious, again if its confidential just ignore this lol, just curious is all :)

The Aluminum block is offered in 3 versions.

1- Direct OEM replacement for the 6.1
2- Ready to go as a 426
3- A block that has been roughed bored and can be taken up to a 468 CI

The original plan was a 426, using a bigger bore and a shorter stroke. However, I was down at BES (Tony Bischoff) yesterday and he said go as big as possible. :thumbsup: So, my thought is if I go with a 440 that would give plenty of room to "refresh" Who knows, it may end up as a 468 on day. :lol:

[soontobesrt]

The Aluminum block is offered in 3 versions.

1- Direct OEM replacement for the 6.1
2- Ready to go as a 426
3- A block that has been roughed bored and can be taken up to a 468 CI

The original plan was a 426, using a bigger bore and a shorter stroke. However, I was down at BES (Tony Bischoff) yesterday and he said go as big as possible. :thumbsup: So, my thought is if I go with a 440 that would give plenty of room to "refresh" Who knows, it may end up as a 468 on day. :lol:

Ahhh gotcha, I mean being billet aluminum, Im sure the extra cubes under boost isnt going to be an issue, I know that name, Tony would definitely know his stuff haha. May as well go 468 right outta the box just foe the hell of it lol!!!

And just to think, Roger is running something "similar" - not 8.5 I dont think haha, but has nowhere near the chassis/suspension setup, not to mention being tubbed, you are gonna run crazy fast dude, crazy fast! Any plan on whats gonna fuel this beast? She gonna have a meth setup?

[BJB]

I tried to post these the other day but the site was down...

Some sketches of the project.

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/JeepBDCARMASketch2.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/JeepBDCARMASketch1.jpg

[soontobesrt]

That looks nasty!!! And them tips haha, what are those to scale? Like 8" each hahah, looks good man, Chip Foose in the house!

[BJB]

^^Haha. I really think the exhaust will end up as a side exhaust in front of the rear tire.

[1BAMFR]

***Instant Wood***

[DJ BoNiOmArIo]

oh my those sketches are just pure SEX!!!

[OBXJeep]

can't wait to see the real thing come alive!

[Jerseyboy]

***Instant Wood***

A little Birdie told me that he wanted to do the same thing to your Jeep ;-)

J

[White WK Swagga]

So what's the estimated HP's???

[BJB]

So what's the estimated HP's???

1,400 - 1,500 :cool:

[GR33N D3M0N]

1,400 - 1,500 :cool:

:eek: r u for serious?? haha thats awesome

[BJB]

Update... The cage is just about complete. Could be rolling in a month.

Going down to check it out on Sunday.

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/66427_160594990627031_100000295930275_415109_15157 61_n.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/65966_160594963960367_100000295930275_415107_67350 75_n.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/64884_160594933960370_100000295930275_415106_16949 05_n.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/64047_160594977293699_100000295930275_415108_39519 70_n.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/33642_160594910627039_100000295930275_415105_63596 64_n.jpg

[1BAMFR]

Holy Hell!!!!!!!!!!!!!!

[GR33N D3M0N]

:eek: looks awesome!!!

btw: im lovin the dash :P haha, J/K

[Boniomario Reloaded]

dang that is nice

[turbojeep01]

wow

[555ctsv]

I met Steve at the Piston Power Show over the weekend. They had a twin turbo 426 Challenger on the dyno at the show that I watched put out 1,358 rwhp! Steve seems like a really cool guy. I went by the shop at lunch today and saw your jeep there. Looks great man! I need a tranny rebuild, new cam, and a tune and am just waiting on a quote. I just moved to Cleveland from Dallas and had no idea this place is only 8 miles from where I work!

[Harrison@Stage6]

That thing is gonna be nasty Brian. So what, a mid 10 sec. Jeep isn't fast enough for ya? You haven't even got it dialed in yet or even cracked open the bottle!! You must have a small pee pee and some huge nuts bro. That or a serious HP addiction problem.

Hello, my name is Brian and I'm a Horse Poweraholic.

[moosehead]

...Hello, my name is Brian and I'm a Horse Poweraholic.


Uh, me thinks much of the rest of this board would be in that therapy group, including said HBallz.

BDCARMA has got to be the most kick arse rig we're gonna see here. No, really. Closest I'd ever get is some Mattel models from grade school and those were pure fantasy.

[jdcollins86]

this is amazing!!!

[jntdysf]

Nice work!

[BJB]

RDP working on the rear diff this week. I'm pretty sure the axles will be a custom order. :lol:

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/reardiff4.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/reardiff3.jpg

[Scottina06]

that is some cool work

[SRTgirl]

Wow! I need that! :thumbsup:

[BJB]

Been really busy at work the last month not making any money!!:lol:

Here is a update video as of today...

M0uAeE9pulM

Any admin, feel free to embed the video... I for one can't get it to work, LOL :slapfight:

[robpp]

done

[SRTgirl]

Coming along quite nicely Brian! When do we get to see this thing in action? It's taking to looonnnggg, get it done! :D

[BJB]

Coming along quite nicely Brian! When do we get to see this thing in action? It's taking to looonnnggg, get it done! :D

Oh, I'm sure it will be complete for this summer... I'll bring it down so you can take a look :D Detroit to Naples should take about 3 hours! :lol:

[Scottina06]

Lol

[soontobesrt]

Oh, I'm sure it will be complete for this summer... I'll bring it down so you can take a look :D Detroit to Naples should take about 3 hours! :lol:

^ lol . . . but seriousley :eek:

[GR33N D3M0N]

Oh, I'm sure it will be complete for this summer... I'll bring it down so you can take a look :D Detroit to Naples should take about 3 hours! :lol:

If you're gonna be in Naples let me know haha nice rig man!

[SRTgirl]

Oh, I'm sure it will be complete for this summer... I'll bring it down so you can take a look :D Detroit to Naples should take about 3 hours! :lol:

3 hours? WTH, I thought that thing was supposed to be fast! :lol:

And don't think I didn't notice you said I could look, not drive it! :(

[BJB]

Was down at RDP on Friday. BDCARMA is looking good! Here are a few shots on Friday.

All glass will be replaced with polycarbonate. All internal door part have been removed. The operators will go in my Kid's Jeeps as we all know about the slow passenger window operator :rolleyes:


http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Jeep1-28-2011006.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Jeep1-28-2011007.jpg

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Jeep1-28-2011005.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Jeep1-28-2011004.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Jeep1-28-2011003.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Jeep1-28-2011002.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Jeep1-28-2011001.jpg

[Scottina06]

epic

[GR33N D3M0N]

epic

X2 haha

[1BAMFR]

Holy FUKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK KKKKKKK:eek::eek::eek::eek::eek::eek:

[blackpepper]

So epic..

[Harrison@Stage6]

Brian.... you're my fukin' hero!

[SRTgirl]

Is it summer yet........I'm gonna run out of popcorn if ya don't finish that thing soon :popcorn:

I'm gonna have to plan, seeing that run, into vacations this year! :cool:

[BOYCHIKS]

I've been watching the build on their Facebook... Looks scary!

Can't wait to see it in action Brian!

[hawkman996]

That is one crazy build! F-ing awesome! :thumbsup:

[1BAMFR]

I want to see this badboy run in person...

[BJB]

All the forward glass is complete. Heading down to RDP in the morning.

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield025.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield026.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield034.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield033.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield035.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield029.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield038.jpg

The moon roof was a Challenge as it had to be thermoformed.

Needed to make a form using the OEM glass

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield016.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield015.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield012.jpg
Convection oven.
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/Windshield008.jpg

There is a couple of video's in my album if anyone is interested.
http://s423.photobucket.com/albums/pp312/BJBSRT8Jeep/BDCARMA%20the%20Build/

[Scottina06]

very cool

[scoutermike]

Hey Mike, is that you and I in your sig picture?? :cool:
Yes it is Brian. Milan Dragway

[teekay1]

Damn.............

[soontobesrt]

DROOOOLLLLLL, I am at a loss! Brian this is by FAR the most epic JEEP build ever! Cant wait to see the World Record broken. Shit, Ill drive 500 miles to see this thing in person!
1

[DJ BoNiOmArIo]

Nice progress, amazing

[NHWK05]

Wow I cant wait to see it all done!

[Jerseyboy]

Yes it is Brian. Milan Dragway

Thats actually both of you. Some good looking guy from Jersey too that pic a couple of years ago ;-)

J

[scoutermike]

Thats actually both of you. Some good lucking guy from Jersey too that pic a couple of years ago ;-)

J

:D That would be correct.....

[Colt]

That jeep is going to be an animal... wow !!!

[triggasrt]

subscribed

This is just amazing! :clap::drool:

[soontobesrt]

BUMP BUMP BUMP! Hey Brian, whatever happened with this. From the looks of things, this thing should be nearing or already on the road! I mean I don't know the pace the guys were working at but under full steam and where you left off Id bet youre nearing or been on the dyno already? I sure know I'm ready for an update whenever you see this with pictures and/or video ;)

[jps043]

The jeep is currently having some downtime.

[soontobesrt]

The jeep is currently having some downtime.

Do you know what happened to/with it? pm me if its a non-public matter lol, im very interested in hearing the progress/plans for this.

[Harrison@Stage6]

BUMP BUMP BUMP! Hey Brian, whatever happened with this. From the looks of things, this thing should be nearing or already on the road! I mean I don't know the pace the guys were working at but under full steam and where you left off Id bet youre nearing or been on the dyno already? I sure know I'm ready for an update whenever you see this with pictures and/or video ;)

They've been working on it about as fast as snails phuck!!

[soontobesrt]

They've been working on it about as fast as snails phuck!!

I know kinda odd :confused: Hopefully we can get to see it run this summer???? Well either way, shell live one day - Fastest SRT8 Jeep ever Im sure, still would love to know what kind of powerplant/class he plans on running her in

[53cj87mjandcounting]

sick

[antsjeep]

:kewl:

i CANNOT WAIT to see what he chose for the power plant! :drool: