antifoulers

[nycxed]

i cannot pass NY inspection because of my kooks headers with high flow cats. i heard theres a solution to fix this. can anyone help? thanks in advance :)

[robpp]

i saw you pleas for murfman on other forums....he was here for a while but hasnt been around lately.

the anti-foulers ONLY work on the 06 IIRc. maybe 1 or 2 07 have passed but NONE with Kooks, only ARH.

just get you self some standard anti foulers. i think he uses 2 per side. then its a hole 31/64 and some stell wool.

[nycxed]

i have a 06 with kooks hi/flow cat. where can i get those standard foulers? i just dont want to buy any kind of foulers that wont work.

[nycxed]

where are you murfman!?!?

[nycxed]

post number 9

[nycxed]

post 10!

[murfman]

I have had the anti foulers on my Jeep since March of 09, and even with my 392 and Big Inertia cam I passed my first Illinois OBD test last weekend. I can make a set up for you, and send them out next week, as I am currently sold out. Thanks Murf

As stated above, they ONLY work on 06 Jeeps.

[Knuckles]

I have had the anti foulers on my Jeep since March of 09, and even with my 392 and Big Inertia cam I passed my first Illinois OBD test last weekend. I can make a set up for you, and send them out next week, as I am currently sold out. Thanks Murf

As stated above, they ONLY work on 06 Jeeps.


Still have your set and I am tinkering with it to see if I can get my 08 to be good for at least a few hundred miles before I have to reset the code.

[Mike_Levy]

The non-foulers work on all years. My 08 got through inspection with them with Stainless Works 1 3/4" and high flow cats.

I made my own. Will never do it again. Without a drill press, drilling them out is a BITCH.

[nycxed]

I have had the anti foulers on my Jeep since March of 09, and even with my 392 and Big Inertia cam I passed my first Illinois OBD test last weekend. I can make a set up for you, and send them out next week, as I am currently sold out. Thanks Murf

As stated above, they ONLY work on 06 Jeeps.

cool. hope it works!

The non-foulers work on all years. My 08 got through inspection with them with Stainless Works 1 3/4" and high flow cats.

I made my own. Will never do it again. Without a drill press, drilling them out is a BITCH.

it doesn't work for people who have kooks... :(

[Knuckles]

The non-foulers work on all years. My 08 got through inspection with them with Stainless Works 1 3/4" and high flow cats.

I made my own. Will never do it again. Without a drill press, drilling them out is a BITCH.


I believe they will work too Mike as I have an 08. I have a set that I bought from Murf and have modified and seem too look promising so far. How many miles do you get out of yours before you get a CEL and how many miles are you going thru to get thru the drive cycle so you rear O2's are in the Ready State?