Need audio help

[hydro899]

I removed the stock radio from my 06 laredo and put in a new pioneer one after getting every thing hooked up i got no sound out of my speakers.. which i know is because i have to run it through the exsisting amp in the car.
where i need is help is finding the amp and getting access to the amp im trying to figure ou the easiest way to do what has to be done. any advice or tricks?

[Scottina06]

there are quite a few memebers who would know this....Matt is one. Someone will chime in soon. Sorry....I have no idea....LOL

[hydro899]

After pullin apart the car i found the amp behind the left panel behind the back seat

[GhettoB879]

well you found the amp that's good i really hope your planning on totally bypassing the amp and not integrating it into the system as far as i know they make 2 harness for integrating and i dont know if i just have an old harness or what but mine hasnt worked since i get it last year and im still messing around with everything trying to get stuff to work but good luck on your system man hopefully you have better luck than me by the way the 2 harness i know about are the PAC C2R-CHY4 and the Metra Axxess CHTO series good luck man

[jkram]

When I did my sub install, I was going to use a low level input to the OEM amp. I couldn't get it to work. I think there is no standard low level audio there. It might be SPDIF (digital). So I grabbed speaker level feeds.

BTW here's a link to the sub build. Off topic though.

http://www.jeepgarage.org/showthread.php?t=1366

[Matt]

I removed the stock radio from my 06 laredo and put in a new pioneer one after getting every thing hooked up i got no sound out of my speakers.. which i know is because i have to run it through the exsisting amp in the car.
where i need is help is finding the amp and getting access to the amp im trying to figure ou the easiest way to do what has to be done. any advice or tricks?

What wiring harness did you use to connect your Pioneer to the existing factory wiring?