Side Moldings Swap

[Megatron]

Just wondering.

If I trade side moldings with a fellow jeep member, how hard/or is it even possible this can happen?

[robpp]

its easy.

best way is to pop off the inner door panels, you dont need all the way, just the bottom part. i was able to just pull on the bottom of the inner panel and it popped off. then you reach in and push the pins/clips holding the trim to the door, out.

thats the best way not to mess up what you have on there so you can sell.
and its not that hard. i think on one end of the front there is a small piece of t2 side tape too. but these clips/pins they just push out. its a easy job.

[Megatron]

its easy.

best way is to pop off the inner door panels, you dont need all the way, just the bottom part. i was able to just pull on the bottom of the inner panel and it popped off. then you reach in and push the pins/clips holding the trim to the door, out.

thats the best way not to mess up what you have on there so you can sell.
and its not that hard. i think on one end of the front there is a small piece of t2 side tape too. but these clips/pins they just push out. its a easy job.

Thanks Rob.

Is there a chance a clip might break?

[robpp]

i never saw inside the chrome, mine are all the laredo ones. but there is not much chance or breaking them by pushing them through. more risk of breaking one if you try to pull from the outside. but from inside much better odds it will be 100% perfect.
im guessing the chrome ones have similar clips to the Laredo ones. they use the same hole.

[Megatron]

i never saw inside the chrome, mine are all the laredo ones. but there is not much chance or breaking them by pushing them through. more risk of breaking one if you try to pull from the outside. but from inside much better odds it will be 100% perfect.
im guessing the chrome ones have similar clips to the Laredo ones. they use the same hole.

Oh all right, I didn't even know about the method you told me. All the ones I remembered seeing was to yank them etc. Thanks for answering the question. Hopefully the member will be willing to trade and can paint his moldings by daniel.

[robpp]

Oh all right, I didn't even know about the method you told me. All the ones I remembered seeing was to yank them etc. Thanks for answering the question. Hopefully the member will be willing to trade and can paint his moldings by daniel.

ok so you are buying laredo ones.....

i got you covered if you need some clips from the other guy YANKING them out. give him the same tips I gave you.

but i have my own yanked out laredo ones, one piece, pushed the rest out LOL anyway i have some spare clips for the laredo if you need them.

[Megatron]

ok so you are buying laredo ones.....

i got you covered if you need some clips from the other guy YANKING them out. give him the same tips I gave you.

but i have my own yanked out laredo ones, one piece, pushed the rest out LOL anyway i have some spare clips for the laredo if you need them.

Well, I'm just planning ahead. No purchase yet, but I would like to trade the ones on my wk for a pair of chrome ones. But yeah.

Thanks Rob. Appreciate it your advice and spare clips :lol:

[pkang21]

i want the thin onessssss if u r just gonna buy the chrome ones

[AcidCold]

One day i will be removing my chrome for color matched ones! that will look sick! Oh.. and i need my matching door handles from Justforjeeps..

[Megatron]

One day i will be removing my chrome for color matched ones! that will look sick! Oh.. and i need my matching door handles from Justforjeeps..

Acid you have PM. :thumbsup:

[RedRocker]

I have a set of chrome strips from my '08 someone can have for shipping (I replaced with color-matched strips). I used the "yank" method to remove them so a few of the clips broke, but a strip of 2-sided tape will fix that.

[Megatron]

I have a set of chrome strips from my '08 someone can have for shipping (I replaced with color-matched strips). I used the "yank" method to remove them so a few of the clips broke, but a strip of 2-sided tape will fix that.

PM'd you sir

[DAVY27]

Spare clips for ya Paul also incase Rob have trouble getting to you. Since u pass by Queens Blvd, it wouldnt be any prob for me.
Dave

[AcidCold]

That's nice of you TRZ! Tom right?
That made your day huh paul??

[Megatron]

That's nice of you TRZ! Tom right?
That made your day huh paul??

I love JG. <3 LOL. Tom is the best.
i wish everyone lived near me. one big bbq @ my house