GB: WK Halos will be here soon......no BS

[robpp]

Hi Guys, It seems like years we have been discussing this: well its going to happen sometime real soon. The vendor, Flashtech, has contacted me that the final version of our LED halos are on the way, he will hev them between the 15th and 18th of this month.

Here is the list we have. I need to have 8 to make the vendor happy and I will buy the reaminder to make sure we have 8.

but if you arent on the list, and want a set, PM me and i'll sell you one of the overflow.

FINAL LIST: DEPOSIT PAID

1. robpp: 6000K DEPOSIT PAID
2. robpp: Green DEPOSIT PAID
3. xxxstugotsxxx: 6000K DEPOSIT PAID
4. jeepaholic 6000K DEPOSIT PAID
5. 05Silver_C 6000K DEPOSIT PAID
6. TomMHP 6000K DEPOSIT PAID
7. white available 175 plus shipping
8. white available 175 plus shipping


_________________________________

From the vendor: Everything will be to me on the 15-18th and we can ship out. these will all come with a special built in the usa adjustable voltage regulator.

He has a few more sets, im not sure how many, but if you want in at this price, speak up real quick!

Rob

[KITSOS]

how much are these and what do they look like?

[Relwarc]

link to original thread? are they an entire headlight replacement? plug and play?

[robpp]

how much are these and what do they look like?

they havent made these for the Jeep yet. but you can go to headlightsupercenter.com to see them for the LX.

the difference with these is they come with a voltage regulator. so you can adjust the brightness.

link to original thread? are they an entire headlight replacement? plug and play?


http://jeepgarage.org/showthread.php?t=230&highlight=gb+led

you need to open your lights to install these.

---------- Post added at 02:04 PM ---------- Previous post was at 02:03 PM ----------

there are 2 sets up for grabs as part of this GB.

[NHWK05]

how much are these and what do they look like?

http://img.photobucket.com/albums/v293/xtremejeeper/Random%20Jeeps%20and%20stuff/JeepHalos2.jpg

[Escape]

Those above are the CCFL halos...The LED's are very similar though!

Escape

[NHWK05]

Those above are the CCFL halos...The LED's are very similar though!

Escape


Yea, i know but its to give anyone who has never seen them an idea.

[robpp]

Those above are the CCFL halos...The LED's are very similar though!

Escape

Right Escape. LEDs so we dont have any fires. Also, with the voltage regulators, you can adjust the brightness......




I know you have the CCFL's, BE SAFE and be sure to use a relay and a fused power wire to those 110v converters............

[Escape]

Right Escape. LEDs so we dont have any fires. Also, with the voltage regulators, you can adjust the brightness......

I know you have the CCFL's, BE SAFE and be sure to use a relay and a fused power wire to those 110v converters............

You know it man, Heck I'm thinking about chopping up some of my old turnout gear and making a Nomex (fireproof) box for them as protection. No meltdowns here! :thumbsup:

If there does happen to be a fire I'm putting a Boosted 426 in it then!

Escape

[robpp]

glad you know about that. sorry to even bring it up.

[DAVY27]

are they like the AAC halos?

[robpp]

but better!

these are LED, standard 12 v. come with voltage regulator so you can adjust brightness.

the CCFLs have a 110V power inverter that goes on fire quite a bit.

the vendors website: http://www.headlightsupercenter.com

[Marlin]

Ohhhh, these are rather swish :)

[Frankie]

About time!!!! LOL

[NHWK05]

I wish i had the money.

[White WK Swagga]

Damn those look good. I was liking the led eyebrow better but now I don't know... LOL

[robpp]

holy **** here are some pics......some have both circuits going, some only show one... think of the possibilities......

http://i300.photobucket.com/albums/nn11/robpp/_whistler/JGCrings001.jpg

http://i300.photobucket.com/albums/nn11/robpp/_whistler/JGCrings002.jpg

http://i300.photobucket.com/albums/nn11/robpp/_whistler/JGCrings003.jpg

http://i300.photobucket.com/albums/nn11/robpp/_whistler/JGCrings004.jpg

http://i300.photobucket.com/albums/nn11/robpp/_whistler/JGCrings005.jpg

http://i300.photobucket.com/albums/nn11/robpp/_whistler/JGCrings006.jpg

more info later. we are still waiting on regulators. itll be a few more day. I have some other notes from Steve to share too.

---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------

For the 6 sets in the group buy Steve says he can add fogs in for 89. and the regulator can handle all three rings.

Im in...........

a few more days he'll have all the regulators in hand, we can get our shit shipped!

[White WK Swagga]

Thats f*cking sick looking Rob.... I can't wait to see the finished product....

[Knightrider03m]

Those halos really make me hate that I didn't get a WK :(

[NHWK05]

Thats sweet, i wish i had the $$.

You get just the C shaped rings not the reflector as well right?

[Frankie]

Never thought Id see the day! LOL

---------- Post added at 10:12 PM ---------- Previous post was at 10:11 PM ----------

Looks like Ill be baking this Sun!!!!

[DAVY27]

o dam, that looks amazing. waitin to see finished product and installation

[robpp]

Thats sweet, i wish i had the $$.

You get just the C shaped rings not the reflector as well right?

yes kyle the chrome piece is inside your headlight. you attach the leds to it.

[Escape]

Any updates Robpp?

[robpp]

Steve promised no later than this week coming up.

Did you talk to him and get in??

[Escape]

I've contacted him, awaiting a reply.

[Frankie]

For some reason I am hesitant to get my hopes up! LOL

[macmac]

How bout install? Are these still a PAIN in the A$$ to install. Do they require taking the headlight assembly apart, and then putting them in the oven to re-seal?

They look great, would def get them, but dont think I have the patience for the install.

Let me know
________
Hemp (http://marijuanahemp.com)

[robpp]

yes, you need to open the headlights for install.

[robpp]

Ok GUYS. Steve says we are all set to go.

I will send PM's with this same data.

For the GB, you will recieve the lights of the color you chose. Why this took so long was we had to get voltage regulators made to limit the juice to no more than 12 v going to the leds. That has led to a ton of extra cost that wasnt planned for in the beginning.

So Steve has said he will absorb the cost of the regulators if we will absorb the shipping.

And also, he has matching fogs for 89 more. the regulator can handle up to six rings so you only need the one regulator.

So for the guys on the GB he is ready for payment.

It will be 149 plus 12 for ground or 17 for express shipping. Minus your initial payment
(75?). YOu need to send paymet via paypal to steve at flashproducts@gmail.com

be sure to include address and forum name so they can match you up with the deposit.

I personally cant wait.........

[Frankie]

Sounds good...So its it 150 for everyone or just us that went in early?!

[robpp]

its 161 for us early guys, 175 plus shipping for any stragglers.

[Frankie]

I sent him a shipping question...Payment will be sent shortly!

[jeepaholic]

I sent my payment already.

[Escape]

Payment and Email sent!

[robpp]

Here is some instructions for the Voltage Regulator.

please use this guide to handle your wiring.

[Escape]

Thanks Rob!

[Escape]

Hey Rob,

Do you have your lights put together yet, if so what did you use to attach the Halo's to the light?

Need some pics too...lol

Escape

[robpp]

i havent recieved the halo's yet.......maybe today.

[Escape]

FedEx was just here! Halos are in my hands, now they just need to be installed into my lights.

Plus I'm picking up the Jeep TODAY! I'm going to have a busy weekend doing alot of installations on the Jeep.

Escape

[robpp]

Good Luck bro.

I havent been home yet but ............woot maybe mine are there too!

[Frankie]

Hopefully Ill have mine soon too! :)

[Escape]

Here is some instructions for the Voltage Regulator.

please use this guide to handle your wiring.

Rob,

The document is broken can't open it. Could you upload it again?

Thanks,
Escape

[LO.7]

Wow, those are so sick. I can't wait to see the finished product.

[Escape]

Halo's are almost complete...I just need to seal, wire and mount them and done!

Can anyone else open the document in Robs post above or is it just my computer?

Oh yeah, and the Jeep is in my garage right now!!!...all but the halos and RamMedic hood are installed......and OMFG is it fast as hell!

and yes I scared my wife pretty bad when I took her for a ride in it...LMAO! but my 4 year old daughter loves it, I just tell her to lean back and hold on!

Escape

[Scottina06]

sooooo.......wheres all the pics?

[Robert Palmer]

sooooo.......wheres all the pics?

X2. I demand pics and vids otherwise you will get...............




http://i296.photobucket.com/albums/mm183/crookster77789/Permaban.gif



:D

[Tbone06]

I call bs :p

[robpp]

Rob,

The document is broken can't open it. Could you upload it again?

Thanks,
Escape


Here is a zip with the original doc. send me an email addy if this is no good.

[Frankie]

Post up some pics of them not lit up please Rob!

(Havent gotten mine yet)

[LO.7]

I can't wait to see these things. Frankie you best be sending me a text when you start working on these things.

[Frankie]

I can't wait to see these things. Frankie you best be sending me a text when you start working on these things.

Will do! Unfort it will prob be a pic of melted headlights! HAHA!

[LO.7]

hahaha go easy with that heat.

[robpp]

i went and bought a small fire extinguisher. J/K. But I was on guard. I wasnt multi tasking for sure.


Take the back of the light apart. remove all that rubber back and plastic back there. strip it down as much as possible. of course heat them face up.

and be VERY careful of the mounts. figure out that before you put them i nthe oven. I used some towels and a big piece of duct tape to fill in between the mounts while you are trying to take them apart.

if you have trouble, let them cool a little then back in the oven.

---------- Post added at 10:58 AM ---------- Previous post was at 10:53 AM ----------

here are some pics

im up to my elbows in my Neffy mods these are going to wait until next weekend.

http://i300.photobucket.com/albums/nn11/robpp/_whistler/IMG_1149.jpg

http://i300.photobucket.com/albums/nn11/robpp/_whistler/IMG_1150.jpg

[Frankie]

Im going to bake these today and get them open!

Rob, Ill prob call you in a bit for some tips! LOL

[White WK Swagga]

Frankie you got till 8:30 tonight to post pics or I'm telling the blond from Hooters you're into guys and you have the chlamydia. LOL

[Scottina06]

he's working on them right now.......

[Frankie]

I cant even get my first one apart! LOL

---------- Post added at 03:28 PM ---------- Previous post was at 02:54 PM ----------

Got my first one apart...WHAT A BITCH! Hopefully the second one will be easier since I know what Im doing a bit better!

[robpp]

17 texts and 2 phone calls. I hope the next one is easier!

[Scottina06]

Lol>.........

---------- Post added at 03:58 PM ---------- Previous post was at 03:58 PM ----------

paint em black while ya got em open Frankie!

[Frankie]

Second one was a breeze! LOL

Thanks for all your help Rob!!!! :)

I took a bunch of pics and am going to write up a "How To" right now!

---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------

paint em black while ya got em open Frankie!

I was thinking about that...Not sure yet though!

[Escape]

Here is a little write up for everyone on how I did it.

After your lights are apart and either before or after painting them. Tape off where you will be drilling your lights for the halo power wires to fit through.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0015.jpg

Test fit them and mark where the leads will go through at.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0016-1.jpg
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0017-1.jpg

Drill the holes with the blue tape still on so you don't mess the finish.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0018.jpg

Test fit them to make sure they align where you want them to sit at.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0019-1.jpg

Apply 3M automotive adhesive tape to the back of the Halo.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0013.jpg

BE CAREFUL ON THIS STEP...you have 1 shot at it...once it's stuck it's there FOREVER! Now fish the leads through and align the Halo's where you want and stick them.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0020.jpg

Repeat and you have this.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0021.jpg

Now you just need seal up the headlights, Black silicone adhesive works well, wire them up and install. I haven't got that far yet will post more when I do.

And here is a teaser pic of the XRT8 Punisher. I still have to get my RamMedic hood (should be this or next week), install the Halos and rims and tires, the winter ones are on it right now.
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0023-1.jpg
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0024.jpg

Enjoy,
Escape

[Dylans3960ccs]

still got that silly roof rack hehe.

[Scottina06]

awesome escape........you need your own thread bro for that beast!!!!

[Escape]

awesome escape........you need your own thread bro for that beast!!!!

Soon as I get her done!

[robpp]

i like the 2-sided tape instead of the epoxy.....

[Frankie]

Got mine! :)

Will be following Escapes install this weekend! :)

[Escape]

I'll soon have a full wiring write up with pics on the wiring too.

I wired mine into the parking lights without cutting any of the factory wiring! To deactivate the 3157 parking lights simply remove one of the inner contact wires on the light bulb (inside ones are the parking, outside ones are the blinker). Wired the activation lead into the factory relay for the parking lights, no need for the ground (Lead #16) as I'm alread using a full factory circuit.

Here are some pics of my 10,000K Halo's:
Halo's Off-

http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0045.jpg
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0041.jpg

Halo's On...Currently running 10v I think I'm going to turn them down a bit, they are very bright!

http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0043.jpg
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0038.jpg
http://i41.photobucket.com/albums/e295/My_Kiddos/JAMES%20STUFF/IMG_0042.jpg

These are just the halo's and fogs, as you can see they are very bright indeed! I need to get some sylvania silverstar's for the fogs, lows and highs so they all match.

Escape

[robpp]

looks awesome bro....

but yeah turn them down some

and i look fwd to the wiring help!

[Dylans3960ccs]

holy crap those halos make it look like you have your highs on. lol

[Frankie]

w000t w000000000t

Cant wait to get mine up and running! LOL

[LO.7]

Wowswer those are sick!!!

I didn't know you could control the amount of juice going to them as well. Can't wait for the rest of the pics from everyone else too.

[White WK Swagga]

Damn those look sick!!! Nice Job!!!

[Tbone06]

WOW im speechless .... That looks fookin killer!!!!!!!!!!

[LO.7]

w000t w000000000t

Cant wait to get mine up and running! LOL

Dude hit me up when you are installing these things over the weekend.. I'll even help you out!!

[Frankie]

Dude hit me up when you are installing these things over the weekend.. I'll even help you out!!

Will do! Ill prob do it Sunday morning!

[LO.7]

Sounds good dude, I'll be around.

[B.P.O.D]

wowow escape those look unreal!!!!!!!!!!

[iJeep]

Looks really good Escape.. Nice mod.

..... Just an idea ;) http://cgi.ebay.com/ebaymotors/20-Jeep-Grand-Cherokee-SRT8-Black-Wheels-20x9-10-NEW_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQha shZitem2c50a5dc90QQitemZ190331608208QQptZMotorsQ5f CarQ5fTruckQ5fPartsQ5fAccessories#ht_5218wt_1167

[Escape]

Looks really good Escape.. Nice mod.

..... Just an idea ;) http://cgi.ebay.com/ebaymotors/20-Jeep-Grand-Cherokee-SRT8-Black-Wheels-20x9-10-NEW_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQha shZitem2c50a5dc90QQitemZ190331608208QQptZMotorsQ5f CarQ5fTruckQ5fPartsQ5fAccessories#ht_5218wt_1167

No worries, I have a line on some OEM Forged ones. She does needs rims and tires bad!

Next item which should be here soon is my CF RamMedic hood, then the OEM Rims, then new stage 3 trans and upgraded fuel system so i can push her even more.

Escape