GROUP BUY!!! New production of Thermal R&D 5" tips!

[Harrison@Stage6]

I just got off the phone with Chuck at Thermal R&D and I asked him about making us some 3" inlet 5" Out x 8" Angle Cut Double Walled tips for us and they're down for it! If we can get 5 people together for 10 ten and more..... then our price will be $80.00/tip. It will take about 4 weeks for them to be made since they're kinda slammed right now. Normal price on the tip would be $99.85 and he said he'd hook us up for $80.00. It's good for me.... any other takers? Here's a pic of mine which are the same tips, but NOT angle cut. I will say that quality is top notch on these. Mirror finish and pimp looking!
And mine have been straightened since this picture for all you anal people!!:lol:

Here's the list....

1. Harrison
2. HawkMan
3. AF Maineiac
4.

http://i609.photobucket.com/albums/tt173/HarrisonZ/JeepDetailing011-2.jpg

http://i609.photobucket.com/albums/tt173/HarrisonZ/JeepDetailing012-2.jpg

http://i609.photobucket.com/albums/tt173/HarrisonZ/JeepDetailing013-2.jpg

[DirtyBlackJeepSRT]

They aren't different tips like last time? :lol:

Which are shinier, your wheels or the tips?

[Harrison@Stage6]

No..... these 2 match!:lol: Good question... I'd have to say the Tips since they're chrome vs. polished/clear coated.

Man I so focking pissed at the red site. That site has just flat out turned to shit! This NSV crap is seriously getting out of hand over there. NAME ME ONE FOCKING VENDOR THAT SELLS THESE?!?! Or any 5" tip for that matter. Totaly horse shit. I'm done over there. I want my money back as far as being a lifetime supporter!

[mandan007]

Kewl! Good thing you got them straightened, or I'd say something! :lol:

[mandan007]

No..... these 2 match!:lol: Good question... I'd have to say the Tips since they're chrome vs. polished/clear coated.

Man I so focking pissed at the red site. That site has just flat out turned to shit! This NSV crap is seriously getting out of hand over there. NAME ME ONE FOCKING VENDOR THAT SELLS THESE?!?! Or any 5" tip for that matter. Totaly horse shit. I'm done over there. I want my money back as far as being a lifetime supporter!

Yeah, soon as I posted the name of this site it was deleted, total B.S. :mad:

[DirtyBlackJeepSRT]

What they told me was that it doesn't matter if you're in competition or not. And that you can't sell: repeats or multiples of a same item, anything that is selling on eBay, and anything new.

[Dylans3960ccs]

I don't really like the angle that the exaust ends up at but other wise their pretty cool I could out do any one in the high school parking lot that has exaust without back pressure. lol

[DirtyBlackJeepSRT]

JeepGarage.org got censored the same day on the other site we don't speak of that has 'red' borders.

[blown-wk]

I want my money back as far as being a lifetime supporter!
Thats exactly why I haven't sent them a dime. If it wasn't for us there would be no site at all.

[DirtyBlackJeepSRT]

I hope this place doesn't turn the same way it's already heading. :rolleyes:

[Dylans3960ccs]

I don't know what your talking about this site is heading up up to the top!

[Harrison@Stage6]

I don't really like the angle that the exaust ends up at but other wise their pretty cool I could out do any one in the high school parking lot that has exaust without back pressure. lol

That's why I'm having ANGLE CUT tips made. These are what I have now and I'm going to replace.

[Dylans3960ccs]

^^ sweet! ^^

[B.P.O.D]

they look sweet to me!!!!

[mandan007]

I wonder? If someone put up a post in that other site's discussion on 5" tips and ask members to PM for more info, they could then be directed to jeepgarage.org and learn about the group buy and this better site?

[B.P.O.D]

not sure dan but you can try it. they dont like us apparently:)

[Dylans3960ccs]

^ how do you know? ^

[robpp]

dan and DirtyBlack and Dylan

in both posts and PM's that other site edits our URL.

The operators of this site are currently editing that sites URL in posts in reciprocity.
However, We are going to discuss this further and make a formal policy about it.

So for now, please refrain from posting links to that site. And stand by for our final word on it.

if you want, feel free to PM any one of us to discuss further.

Thanks,
Rob

[Harrison@Stage6]

My thread has been deleted over there. Figures. Commie bastards!

[Dylans3960ccs]

Oh boy I'm on the naughty list lol.

[Harrison@Stage6]

Dan, how about posting up a pic of your tips to show everyone what I'm talking about.

Dan has the tips I'm having made BUT his a 4" inlet not 3". The 4" requires a little more worj for the muffler shop to install whereas most aftermarket SRT8 systems are 3" vs. the 2.75" stock. Just a little FYI.......:D

[robpp]

no naughty list for you Dylan. just want you guys to know where we stand on this topic.

[Scottina06]

awesome tips Harrison! I want those...so $80 each or $160 for two

[Harrison@Stage6]

$160.00 for both. That's pretty good. The cheapest I found was $76.00 for the ones I have now and those were already made. They're custom making these for us. I guess I need to put a time limit on this GB huh? They said at LEAST 5 set(10 tips). We've got 3 sold already from the other site. Let's see how many we can get!

[Harrison@Stage6]

Here's the list....

1. Harrison
2. HawkMan
3. AF Maineiac
4.

[B.P.O.D]

might be better if you put the list in the first post... IMO

[Dylans3960ccs]

no naughty list for you Dylan. just want you guys to know where we stand on this topic.

Oh ok just a point of intrest right? :D

[mandan007]

Dan, how about posting up a pic of your tips to show everyone what I'm talking about.

Dan has the tips I'm having made BUT his a 4" inlet not 3". The 4" requires a little more worj for the muffler shop to install whereas most aftermarket SRT8 systems are 3" vs. the 2.75" stock. Just a little FYI.......:D

Sure!

http://i262.photobucket.com/albums/ii116/mandan007/srt8/SRT8008.jpg
http://i262.photobucket.com/albums/ii116/mandan007/srt8/SRT8005-2.jpg

[Harrison@Stage6]

might be better if you put the list in the first post... IMO

Done...

[mandan007]

$160.00 for both. That's pretty good. The cheapest I found was $76.00 for the ones I have now and those were already made. They're custom making these for us. I guess I need to put a time limit on this GB huh? They said at LEAST 5 set(10 tips). We've got 3 sold already from the other site. Let's see how many we can get!

Good deal! :thumbsup: I paid about $260 with shipping for mine :eek:

[B.P.O.D]

damn those tips are nice!!! i wish i could use those on my little engine.... brilliant black power!!! hehe

[Harrison@Stage6]

Dan, do your tips slant inwards? Meaning, are they tapered from outlet to inlet?

[mandan007]

Dan, do your tips slant inwards? Meaning, are they tapered from outlet to inlet?

Not sure what you mean? They are double walled, meaning the outside diameter is 5". The 5" outlet tapers inward approx. 1 1/4" down to 4" and is 4" straight back to the 4" inlet. Huh? Now I'm confused by what I just said :confused:

[Scottina06]

what kinda install price did you guys get on these?

[DirtyBlackJeepSRT]

Install shouldn't be more than $75 between cutting and welding.

[mandan007]

I'm sure no one will pay as much as me. Labor, parts and tax = $270.

[DirtyBlackJeepSRT]

Parts = Tips and reducers? Then it's a great price.

[mandan007]

See post #30. $260. for the tips + install fabrication of $270. = $530... (Me dancing)...I love retirement income!!!

[dreamer1213]

Its gonna look awesome Harry...altho I do like the way your tips look right now...they will look awesome angle cut...just make sure they sit in the exact same spot...and is perfectly flush with the top of the cut out too... ;)

[Harrison@Stage6]

See post #30. $260. for the tips + install fabrication of $270. = $530... (Me dancing)...I love retirement income!!!

Holy Freaking Christ BatMan!!!! Did the installer kiss you first? Did he at LEAST give you a reach around? My dude charges us $40.00-$60.00 for install and that's making some manderal bent rear section! Sorry Dan but this dude took serious advantage of you! That sucks but you know what? As long as you're happy spending it and you feel good about it, that's all that matters.:D

[Harrison@Stage6]

Its gonna look awesome Harry...altho I do like the way your tips look right now...they will look awesome angle cut...just make sure they sit in the exact same spot...and is perfectly flush with the top of the cut out too... ;)

They will be. Dwight knows better than to weld it up without my approval!

[TimmyB]

Read this thread and saw some people have an idea of prices for exhaust work so im hopeing im not thread jacking. I dont have an srt, obviously, but I want to put another outlet on the other side of my WK. I have the SS magnaflow cat back on now, is it as simple as just cutting and welding another pipe from the tail pipe say in back of the wheel and doing it that way, or is a new muffler needed with dual outlets? I have no knowledge of back pressure and all that jazz. I'd buy these tips then if i had two tailpipes to put em on. lol.

[hawkman996]

So how are we looking so far on the GB there Harryballz?

I cannot wait to get the new tips on the ole' girl. :)

[Bslagle05]

I wish I could get in on this... only if i had an srt :(

[hawkman996]

I sent 3 or 4 pm's to a people interested in 5" tips on the other site telling them to pm you HB and told them to come over here to check out this thread. Hopefully we can add some more people to the list.

[macmac]

any actual pics of the "angled cut"
________
ALASKA MEDICAL MARIJUANA DISPENSARIES (http://alaska.dispensaries.org/)

[mandan007]

Only pic I took that shows 5" tip from side view:

http://i262.photobucket.com/albums/ii116/mandan007/srt8/005.jpg

[gottspd]

Thanks for putting this together. I wonder, before we go to far, can these folks make a tip that looks more like the Borla tips? The very edge of the tips is rolled and a bit wider than stock and I think that looks cool.

[BillsHoe]

Harrison so were getting the angle cut ones correct on group buy and there 8 inches long. My exhaust is stainless but these tips are chrome? Can we get stainless? I want to replace my B&B tips and if these fit length I will be down. Mine now are 3 in and 4.25 out. Just not sure how long so i got to check tomorrow.

[hawkman996]

Where you at HarryBallz? Have not heard from you in a couple of days........

[blown-wk]

can these folks make a tip that looks more like the Borla tips? The very edge of the tips is rolled and a bit wider than stock and I think that looks cool.
The whole point of having these made is so they DON'T look like the Borla tips. Lots of us don't care for that rolled edge look. If you want something like the Borla they have a Flowmaster tip that looks similar.


Harrison so were getting the angle cut ones correct on group buy and there 8 inches long. My exhaust is stainless but these tips are chrome? Can we get stainless? I want to replace my B&B tips and if these fit length I will be down. Mine now are 3 in and 4.25 out. Just not sure how long so i got to check tomorrow.
These tips are stainless but polished out like chrome. I had B&B tips on mine before I had the Thermal tips put on. They will fit fine with the B&B but will stick out past the bumper 1-2"

[LonghornSpencer]

Put me down for a set H...I just don't want them sticking out past the bumper but I'll take 'em

[BillsHoe]

These tips are stainless but polished out like chrome. I had B&B tips on mine before I had the Thermal tips put on. They will fit fine with the B&B but will stick out past the bumper 1-2"[/QUOTE]


Chris do you have a picture of them on your Jeep sticking out?

[BillsHoe]

Harrison Im 99% taking the last set

[blown-wk]

These tips are stainless but polished out like chrome. I had B&B tips on mine before I had the Thermal tips put on. They will fit fine with the B&B but will stick out past the bumper 1-2"


Chris do you have a picture of them on your Jeep sticking out?
Yep, if you have the Thermal tips shortened in the rear it will be as close to flush with the bumper as it can get. Maybe stick .5" out.

[gottspd]

The whole point of having these made is so they DON'T look like the Borla tips. Lots of us don't care for that rolled edge look. If you want something like the Borla they have a Flowmaster tip that looks similar.



Oh... hee hee... sorry. Happen to have a link to the flowmaster tips? I loved the look of the borla tips when I had my borla....

[Harrison@Stage6]

Sorry guys.... been busy the last week dealing with the kids out of school and whatnot. :( I'm closing this down on July 1st and starting the order. We can have as many orders as we want. I've got a few from the othe site too so we are over the 5 needed. I'll be in touch. Gotta run...... talk with you guys later on tonight.

[BillsHoe]

Yep, if you have the Thermal tips shortened in the rear it will be as close to flush with the bumper as it can get. Maybe stick .5" out.

Thanks Chris

[hawkman996]

Cannot wait until I gain that extra 1"...AROUND....with my new tips! :p

[LonghornSpencer]

What's the story on these? Ordered? When will they ship? When, who, etc...do I pay?

[B.P.O.D]

i believe harrison said july 1st is the last day to order. you should private message HarryBallZ (http://www.jeepgarage.org/member.php?u=55)

[Harrison@Stage6]

Allright guys..... sorry I haven't been around much. Been kinda busy. SO.... we have 5 orders correct. Here's what I have so far and someone correct meif I'm wrong.

1. Me
2. AF Maineiac
3. Hawkman
4. Billshoe
5. Longhorn Spencer
6. Muay Tai Striker
7. ?

Anymore.....? I'm sending the email now to Thermal and just want to make sure.

[psyou97]

I am assuming I am too late for this, if not count me in. If yes, I will just order on my own. Just registered and came over from the other site.

Thanks,

E

[BillsHoe]

You can take my place I measured my tips and they are 6inches long and stick out past the bumper now atleast 2 inches. Don't think they will work with the B&B exhaust

[Harrison@Stage6]

It's not too late. I still haven't been able to get ahold of Chuck at Thermal.

Bill..... you suck.:lol: Chris has them on his B&B system.

[BillsHoe]

It's not too late. I still haven't been able to get ahold of Chuck at Thermal.

Bill..... you suck.:lol: Chris has them on his B&B system.

HaHa here they are now
http://i245.photobucket.com/albums/gg59/BILLSHOE179/Photo_100807_006.jpg

[Harrison@Stage6]

Ewwwwww..... they look like Pea Shooters!!:lol: Were your sections pushed all the way in? You can get them to go in more and shorten it up. Even Chris' didn't stick out that much.

[psyou97]

I have a Bassani on my truck, hoping they won't stick out that far??? How can I measure to see? Anyone know?