Okay here is a quick “How To” for bypassing the High beam cutout for a WJ jeep.
There are a few different ways that you can do it, this is just my way of doing it.
Items needed: 3x wire taps
7mm socket (to remove headlamp if you use that trigger wire)
1 Fuse going to relay from battery
First thing you need is a signal from the high beams. You can get this 2 places: Either the Pink/Lt Green 18g wire behind the fuse box, or the white wire on the high beam itself. Just tap into this wire and run it to a switch of your choice.
From there you run an output switch from the switch to pin 86 on the relay. I mounted my relay here.
Now go from Pin 87 on the relay to the positive side of both fog lights. Unfortunately I can’t tell you what wire it is since I can’t get my ARB bumper off by myself. If someone takes a picture of the wires connecting to the fog lights I’ll add it here.